The Best X10 Appliance Module Am466

Appliance Module For Home Security and Comfort. Works with X10 Powerhouse Controllers and Timers. Just plug it in…. No special wiring!

The powerful TM751 Transceiver Module is the backbone for any Home Automation setup. It allows you to remotely control any household appliance or light that is plugged into an appliance, lamp module, wall switch module or any of our many other lighting and appliances products. Simply plug the Transceiver into any normal wall socket, and using a remote, you have control of your lamps and appliances from across the room – or the other side of the house. The wireless transceiver module is an integral part of your home control system. It takes radio frequency commands from X10 remote controls and wireless motion sensors and converts them to X10 signals carried over household wiring.

If you want to control X10 modules with a wireless controller, plug in the X10 RR501 Wireless Base Transceiver Module. Unlike the TM751 transceiver, this RR501 model responds to both X10 and RF signals (not just RF), giving you versatile control over the transceiver’s built-in appliance module, as well as your other X10 modules. The RR501 transceiver module picks up radio frequency (RF) signals from X10 wireless remotes and then converts those signals into X10 commands, which are sent over your power lines. In addition to signaling other X10 receivers, the Base Transceiver Module provides a built-in appliance module, which responds to Unit Codes 1 to 9. Plug an appliance or light into the module’s outlet to enable wireless control. The module can be controlled by various X10 remotes, such as the X10 PRO 16-Plus Remote (PHR03) or the X10 PRO Mini Controller (PHC01). RR501 vs TM751 X10 Transceivers: As a two-way transceiver, the RR501 offers advanced features over the TM751. The TM751’s built-in appliance module can only be controlled by RF. This RR501 model also receives X10 powerline signals, allowing you to control the built-in module over the powerline, and receive status reports. Additionally, the RR501 has a switch that lets you choose from Unit Codes 1-9 for the appliance module. The TM751’s appliance module operates only as Unit 1. Finally, the RR501 is about 1.5 inches larger than the TM751. NOTE: Use only one RF Base Transceiver Module or X10 Security Console (which also converts RF signals into X10 signals) per House Code. If more than one transceiver is used on the same House Code, X10 signal collisions may result. SPECS: Power Requirements: 120 VAC, 60 Hz. Load Rating: Resistive: 15 Amps; Incandescent: 500W; TV: 400W; Motor: 1/3 HP. Dimmable: No. Dimensions: 4.25(H) x 2.75(W) x 1.25(D) inches.

NEW DESIGN! This is the new version of the PAT01 and has been dramatically improved! We now have a new amplifier in the units internals which boosts the regular X10 signal sent by the PAT03 to up to 10 TIMES the power as before. This means a more powerful and reliable X10 signal. With longer distance and less fuss with electrical noise, the PAT03 is a worthy upgrade for any X10 system! In addition to a boosted signal, this unit has AGC (Automatic Gain Control). This essentially reduces the noise surrounding the unit, also adding to a more reliable X10 signal through your home! Add RF Remote Control to Your X10 Devices Converts Radio Frequency signals from X10 PRO wireless controllers such as the PHR04 , PHW04D, and PHR03 to X10 control signals. Now you can easily control lights and appliances from up to 100ft away – even through walls – with this X10 PRO Transceiver Module. This powerful module works with handheld wireless remote controllers such as the X-10 PRO 16-Plus Remote (PHR03) to control its built-in switched outlet and up to15 additional X10 modules via the powerline. You can also control the Transceiver Module by other X10 powerline controllers such as the X-10 PRO Mini Controller (PMC01).

You’ll be the envy of all your friends and neighbors when they see how you can control lamps, stereos, fans, porch lights, electric fountains and more – without leaving your seat! Want to control devices from more than one remote? Expanding is incredibly easy! Add as many handheld remotes as you want. As long as they’re set to the same house code as the base, they will control the same devices.

Control up to 8 different groups of X10 compatible receivers (lamp and appliance modules wall switches and universal modules)Dim/bright control and an all-lights-on/all-lights-off buttonCompact design

Plug-in module allows control of appliances/lamps from anywhere in the house using any X10 controllerWorks with fans air conditioners coffee pots stereos TVs and lampsCompatible 15A 1/3 HP and 500-watt appliances