830 reviews analysed
1. Forestchill Wall Mounted Bracket with Cross Bar, fits Mini-Split Ductless Outdoor AC Units,Heat Pump System, Condenser, Universal, Support up to 280lbs, 7000-15000BTU
Feature
- ●Rust free Material-Galvanized steel with powder-coating surface treatment, anti-rusting and weather-proof, perfect for outdoor application.
- ●Heavy Duty Construction-Made of 16 gauge thick steel for heavy duty supporting purpose, supports up to 280lbs
- ●Easy Installation- Hardwares included for your convenience, vibration isolation pads are provided for noise and vibration control purpose. Crass bar for easy level adjustment.
- ●Esay Air Flow-This bracket has long horizental resting bars, provides neccessary clearance (minimum 5” for wall mount, 12” for ground mount ) for condensing operation.
- ●Protection-Install this bracket on the wall and rises the condenser above to avoid dust, debris, water, snow, keep the condenser clean and expend service life.
Description
Forestchill Foldable Wall Mount Bracket
A perfect but simple solution to set your condensor or other machinery, keep the machine away from the ground to avoid dirt, flood and snow, expend service life
Clearfully designed through experience, provide enough clearance for condensing operation and save space
All necessary hardwares included for your convenience. 4 rubber vibration absorber are provided for noise and vibration control.
Important note: Avoid mounting your A/C condensing unit on your bedroom wall, your will still feel the vibration even with the vibration isolation pads installed.
Specifications:
Material: Galvanized steel
Surface treatment: Powder coating
Material thickness: 16 gauge
Foldable: Yes
Loading capacity: Maximum 280 lbs
Dimensions: Height: 14-3/8” Depth: 19-11/16” Width: 30-1/2”
Support: 7000-15000 BTU
Inside package:
1 set (2 pieces) L-shaped Flodable Wall Mount Bracket, hardwares including anchor bolts, nuts, anti-vibration pads.
2. Forestchill Wall Mount Bracket with Cross Bar, fits Mini Split Ductless Outdoor Unit Air Conditioner Condensing Units Heat Pump System Condenser, Universal, Support up to 400lbs, 15000-24000BTU
Feature
- ●Rust free Material-Galvanized steel with powder-coating surface treatment, anti-rusting and weather-proof, perfect for outdoor application.
- ●Heavy Duty Construction-Made of 14 gauge thick steel for heavy duty supporting purpose, supports up to 400lbs
- ●Easy Installation- Hardwares included for your convenience, vibration isolation pads are provided for noise and vibration control purpose. Crass bar for easy level adjustment.
- ●Esay Air Flow-This bracket has long horizental resting bars, provides neccessary clearance (minimum 5” for wall mount, 12” for ground mount ) for condensing operation.
- ●Protection-Install this bracket on the wall and rises the condenser above to avoid dust, debris, water, snow, keep the condenser clean and expend service life.
Description
Forestchill Foldable Wall Mount Bracket
A perfect but simple solution to set your condensor or other machinery, keep the machine away from the ground to avoid dirt, flood and snow, expend service life
Clearfully designed through experience, provide enough clearance for condensing operation and save space
All necessary hardwares included for your convenience. 4 rubber vibration absorber are provided for noise and vibration control.
Important note: Avoid mounting your A/C condensing unit on your bedroom wall, your will still feel the vibration even with the vibration isolation pads installed
Specifications:
Material: Galvanized steel
Surface treatment: Powder coating
Material thickness: 14 gauge
Foldable: Yes
Loading capacity: Maximum 400 lbs
Dimensions: Height: 17-3/4” Depth: 21-5/8” Width: 33-1/2”
Support: 15000-24000 BTU
Inside package:
1 set (2 pieces) L-shaped Flodable Wall Mount Bracket, hardwares including anchor bolts, nuts, anti-vibration pads.
3. Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE
Description
New R410A Ductless Mini Split Systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system (i.e. R22). This new port size is 5/16″ SAE and some gauge sets carry 1/4″ SAE connectors. Port adapter converts the 5/16″ SAE ports to use with 1/4″ SAE gauge sets.
4. Mounting Bracket for 9000-36000BTU Condenser Ductless Mini Split Air Conditioner Heat Pump Systems, Rust Free Stainless Steel
Feature
- High Quality -made of solid thick stainless steel material for longer service life.
- Accurate Construction – advanced technics to ensure brackets are perpendicular to each other when condenser leveling
- Universal Design – Adjustable for use with up to 9,000 – 36,000 BTU Units not exceeding a maximum weight capacity of 360 lbs. It includes hardware and expansion bolts for wall mounting
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils
- Breezy Installation & Versatility – assemble easy enough, all necessary hardware included, bracket serews and expansion screws
5. Daikin 12,000 BTU 17 SEER Wall-Mounted Ductless Mini-Split Inverter Air Conditioner Heat Pump System 15 Ft. Installation Kit & Wall Bracket (230 Volt) 10 Year Limited Warranty
Feature
- 10 Years Limited Warranty
- Daikin 17 SEER Wall-Mounted Ductless Mini-Split Inverter Air Conditioner Heat Pump System (230 Volt)
- Includes: Indoor Fan Coil, Outdoor Condensing Unit, Remote Control, 10 Ft. Installation Kit, and Wall Bracket
- Energy Efficient – 17 SEER, 9 HSPF.
- Coverage Area of 550 Sq.Ft. Applications: Primary living areas (master bedrooms), hot or cold rooms, renovations & remodeling, basements, attics & garages.
Description
As you think about the functionality of your home’s indoor comfort system, the Daikin brand is ready to help you achieve control, energy efficiency and long-term peace of mind. Take that attention to quality one step farther by choosing a Daikin brand energyefficient ductless split system. We have designed and engineered all of our products to provide years of consistent indoor comfort delivering you and your family premium Comfort for Life. Energy Efficient – 17 SEER, 9 HSPF, 10 Year Parts Limited Warranty and Turbo mode cools or warms up the room fast. The Daikin brand 17 Series is designed to blend in discreetly with any home design and are ideal for single rooms. Smart inverter technology integrated with an inverter variable-speed compressor, 17 Series ductless systems delivers the capacity required to maintain desired room conditions, typically reducing energy consumption (compared to traditional fixed-speed ducted systems). This technology minimizes temperature fluctuations and provides continuous cooling and heating comfort.Designed for Comfort for Life, the Daikin 17 Series units include features to ensure a comfortable experience every moment. From the wide angle louver design to the auto-swing and comfortable mode controller settings, effective heating and cooling is ensured throughout the space. Utilizing inverter technology to maintain comfort settings, Daikin systems most often operate at low speeds with indoor sound levels as low as 37 decibels (dB) and outdoor sound levels as low as 51 dB. Activate the indoor unit quiet operation and sound levels drop by 2-3 dB for gentler heating and cooling and quiet operation. Additional features: Energy Efficient – 17 SEER, 9 HSPF, Undisturbed Comfort, Advanced Filtration, Wireless Control. Applications:Primary living areas (master bedrooms and living rooms), Hot or cold rooms, Rooms with poor air flow, Renovations and remodeling, Basements, attics and garages, new construction.
6. Wostore 16 Ft. Copper Pipes 1/4&3/8 Inch 3/8" PE for Mini Split Air Conditioner Insulated Coil Line Set HVAC with Fittings
Feature
- All in one kit: 16Ft. insulated line set*1,wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1, flexible condensate drain hose*1, matching length interconnecting cable(18Ft., 16/4)*1.
- 16 Ft. insulated high quality seamless copper tube showing no leaks, high and low pressure lines. 1/4″ & 3/8″ OD for mini split air conditioners.
- Excellent UV resistant: The insulated copper twin line set has been successfully tested by method ASTM G154.
- Insulated with climate resistant foam for durability,1/2 inch thickened insulated cotton.
- Factory flared with 410A fittings attached, copper coil line set for ductless mini split air conditioner and heat pump systems insulated pre-flared with nuts.
7. Wall Mounting Bracket for 9000-36000 Btu Condenser Ductless Mini Split Air Conditioner Heat Pump Systems, Rust Free Aluminium Alloy Support Brackets
Feature
- ❤Anti-Rust & Durable – Solid and Rust Free Aluminium Alloy material could offer a longer service life, support up to 400lbs.
- ❤Condenser Protection – Raises the compressor unit above ground for protection from dirt, debris, snow, floods, vandalism, etc. are perpendicular to each other when condenser leveling.
- ❤Accurate Construction – Advanced technique to ensure brackets are perpendicular to each other when condenser leveling.
- ❤Damping Capacity – Reliable rubber vibration for shock absorption and correct distance from the wall for air flow.
- ❤Breezy Installation – Easy assembly, all necessary hardware included.
8. Forestchill Decorative PVC AC Line Set Cover Kit Tubing Slot for Central Air Conditioner, Mini Split A/C Units and Heat Pump System,Condenser Unit (3”w x 7.5ft)
Feature
- ●Rust free Material:High quality industrial PVC material, rust free,waterproof and weatherproof, suitable for long term outdoor use
- ●Decorative:Arrange and hide your line set inside this tubes, total coverage length 7.5ft, introduce neat and nice appearance, cost effective.
- ●Highly Competible:Fits most residential central air conditioner, mini-split system on the market, 5000~24000BTU
- ●Protective:Hide the line set and wire inside the PVC tubing, protect them from the UV and weather elements, expand service life.
- ●Item included:2 pcs straight tube 3”W 39”L, 1 pcs end cap, 1 pcs coupling, 1 pcs wall cap, hardware included.
Description
Forestchill PVC Line Set Cover 3 inch 7.5 ft
Features:
A smart but simple solution to arrange your A/C line set with light and rust free PVC tubing
introduce neat and nice appearance for your wall
Hide the line set and wire and protect them from UV and other weather elements, expand service life
This line set cover fits most of the residential central air conditioner and mini-split system on the market, fits 5000~24000BTU
package:
2 X straight tube 3”W 39” L
1 X coupling
1 X wall cap
1 X end cap
Hardware including screws and cable straps
9. Forestchill 14ft Decorative PVC AC Line Set Cover Kit Tubing Slot for Central Air Conditioner, Mini Split A/C Units and Heat Pump System,Condenser Unit (4in)
Feature
- ●Rust free Material:High quality industrial PVC material, rust free,waterproof and weatherproof, suitable for long term outdoor use
- ●Decorative:Arrange and hide your line set inside this tubes, total coverage length 14ft, introduce neat and nice appearance, cost effective.
- ●Highly Competible:Fits most residential central air conditioner, mini-split system on the market, 5000~36000BTU
- ●Protective:Hide the line set and wire inside the PVC tubing, protect them from the UV and weather elements, expand service life.
- ●Item included:4 pcs straight tube 4”W 39”L, 1 pcs flexible tube, 3 pcs coupling, 1 pcs wall cap, 1 pcs elbow fitting, 1 pcs vertical elbow fitting, total of 11 pieces, hardware provided.
Description
Forestchill PVC Line Set Cover 4 inch 14 ft
Features:
A smart but simple solution to arrange your A/C line set with light and rust free PVC tubing
introduce neat and nice appearance for your wall
Hide the line set and wire and protect them from UV and other weather elements, expand service life
This line set cover fits most of the residential central air conditioner and mini-split system on the market, fits 5000~36000BTU
package:
4 X straight tube 4”W 39” L
3 X coupling
1 X flexible tube
1 X wall cap
1 X elbow fitting
1 X vertical elbow fitting
Hardware including screws and cable straps
10. BingSnow 6 Pcs R410a Mini Split Adapter Charging Vacuum Port Adapter Brass Converter with 5/16" Female Quick Couplers to 1/4" Male Flare for Mini Split HVAC System
Feature
- 【Material】Made by high quality pure copper, last long. Easy to operate and install, strong sealing for durability and safety.
- 【convenient】With 45 angle on the service port site for easier access.
- 【Compatible】Used on most newer R410A ductless mini split systems. Perfectly fits for R410a mini split system air conditioners, HVAC and refrigeration service.
- 【Design Skill】In the course of the operation, the thimble will not open the air conditioning core tube, completely solve the problem of fluoride leakage injury, security is guaranteed.
- 【Package】6 x R410a adapter with 6 x PTFE gasket and protective covers,6 x rubber gasket(Extra bonus).
Description
Specifications:
Material: Pure copper
Connectors: 5/16″ Female Quick Couplers to 1/4″ Male Flare
Thread diameter: 0.47 inch(12 mm)
Thread size: 11mm
Total size: diameter: 0.63 inch/ 16 mm, 2.09 inch(53 mm)
Features:
In the course of the operation, the thimble will not open the air conditioning core tube, completely solve the problem of fluoride leakage injury, security is guaranteed.
Brass construction, quick connect, good tensile strength, resisting corrosion and AC low-loss fitting.
Complete package:
6 x R410a adapter with 4pcs PTFE gasket and protective covers.
6 x green rubber gasket(Extra bonus).
Notice:
The material of this product is pure copper. The surface is changed into brass after copper was oxidized.
Due to manual measurement, please allow a slight deviation in size.
Please carefully align with the model you need to purchase. The R410A mini split system is usually equipped with different charging port sizes to avoid loading the wrong refrigerant into the system (such as R22).
Conclusion
By our suggestions above, we hope that you can found Mini Split Acheating System 24000 for you.Please don’t forget to share your experience by comment in this post. Thank you!