Parameters:
Rated power: 20A/4500W
The maximum current: 20A
Working voltage: AC 80V~260V
Frequency measuring range: 45~65Hz
Power measuring range: 0.01W~4500W
Energy measuring range: 0.01Wh~99999kWh
Voltage measuring range: AC 50V~300V
Current measuring range: 0.01~20A
Voltage precision: ±1%
Current precision: ±2%
Power precision: ±2%
Product size: 89.5×54.5x28mm
Product weight: 67g

Notes:
1. The total power resistive load of the connected appliances cannot excess the rated power, otherwise it will be damaged, even fire.
2. 20A electrical tester is built-in shunt, if it doesn’t display power and the power factor, means the wiring connection is wrong, please check the wiring diagram.
3. Except for the wires, other objects should not be inserted into the connection hole; tightening the screws.
4. No waterproof function, only used in dry indoor environment.
5. Far away from children and fire.

Package Includes:
1x AC Multimeter

Parameters:
Measuring accuracy: +/-1.5%, +/- 2 word
Measuring range: AC 80-300V (110V, 220V)
Consume power: Less than 1W(about every 1200hours consume 1 kilowatt-hour)
Plug Style: US Plug
Number of Digits: 3 Digits

Potentiometer adjusting method:
Please use the Phillips screwdriver to open the outer case of the voltmeter;
then adjust the potentiometer with small size Phillips screwdriver.
If the displayed voltage is too high, please adjust potentiometer counter-clockwise;
If the displayed voltage is too low, please adjust potentiometer clockwise.

Application:
The monitor can be widely applied in AC 80-300V mains measurement, such as office, factory, laboratory, household and so on.
-You can use this item in RV as a way to view voltage to prevent issues with appliances.
-You can use this item to monitor the voltage of other appliances; when this volt gauge displays too high or too low voltage, you can selectively turn off your appliances or equipments so as to prolong the life of your appliances.

Notice:
Keep the children away from the product.
Do NOT use the product in a damp environment.

Package Includes:
2x Voltage Test Meter

Feature:
This meter can only be used with one-phase AC power. And it can only measure the active power(real power). It doesn’t show Apparent power.
This product to monitor the power consumption of your electronics, it can even be hooked up (2 of them) in your electrical box for whole house monitoring.
It can be used as a more precise “watt-meter” by plugging/unplugging/turning on household items.
Wire this meter up in a 20 amp circuit feeding some of your power amps.
Specifications:
Working voltage: 80 ~ 260VAC
Working frequency: 50/60Hz
Measuring:Accuracy: 1%
Power Consumption: 0.2W
Measurement speed: 2 times/s
Store data when power off
The blue backlight can be turned on/off manually
Test Range and Display format:
1.Power: test range: 0~22kW
< 1kw,="" display:="">
1kW~10kW, display: 1000~9999W
> 10kW, display: 0.1~22.0kW
2.Energy: test range: 0~9999kWh
<10kwh, display:="">
>10kWh, display: 10~9999kWh
3.Voltage: test range: 80~260V(single-phase)
Display: 80~260V
4.Current: test range: 0~100A
Display: 0.00~99.99A
Precautions:
1. Please make sure the AC input is Pure Sine Wave.(Municipal electric power is pure sine wave). Please don’t use the meter to measure AC power converterd from a DC-AC inverter UNLESS you can make sure the output from your DC-AC inverter is Pure Sine Wave. This is very importatnt.
2. Applied load should not exceed the rated power.
3. Wiring order can not be wrong.
4. This module is suitable for indoor, please do not use outdoor.
Packing including:
1*AC Power Multimeter

Kindly Note
If an abnormal display appears or the buttons produce no response, the Electricity Usage
Monitor must be reset. Please press the RESET button.

Floureon TS-836A Electricity Usage Monitor Help You to Easily Monitor Your Electricity Bill
● You can make certain how much your standby appliances cost, what the power factor is,
whether your appliances are really charged and how long have your appliances been charged.
● Simply plug the meter into the wall and then plug your appliance into the meter.
● Easily measure the power consumption and cost of your electrical appliances.
● Display volts, amps and wattage accurate to 3%.
● Cumulative Kilowatt-Hour Monitor.

Enjoy 8 Display Modes to Reduce Your Electricity Bill
● Time/Cumulative electrical quantity Display
● Time/Current/Power Factor Display
● Time/Voltage/Frequency Display
● Time/Minimum Power Display
● Time/Maximal Power Display
● Time/Watt/Cost Display
● Time/Price Display
● Overload Display

Technical Parameters
● 3-pin US plug
● Functioning indicator
● Frequency Display: 60HZ
● Operating Voltage: 120VAC
● Operating Current: max 15A
● Frequency Display: 0Hz~9999Hz
● Wide Voltage Range: 110V-130V
● Voltage Display Range: 0V~9999V
● Current Display (amps): 0.000A~15.000A
● Timing Display Range: 0 second~9999 days
● Price Display Range: 0.00COST/KWH～99.99COST/KWH
● Power Consumption of the Power Meter Monitor: 0.5W
● Total KWh and Cost Display: 0.000KWh-9999KWh, 0.00COST-9999COST
● Dimensions: Length = 6.1inch(155mm); Width = 2.76inch(70mm); Height = 1.77inch(45mm)
● The Set Wattage display (Watts) is 0W~9999W, But the real Wattage display (Watts) is 0~1800W.

Package Included
1X Power Meter (US Plug)
1X English Manual

Amazon.com

Empowers You to Save Hundreds on Electric Bills

Electricity bills are rising. Now you can cut down on costs and find out what appliances are actually worth keeping plugged in. Simply connect these appliances to the Kill A Watt, and it will assess how efficient they really are. The large LCD display counts consumption by the kilowatt-hour, the same as your local utility. You can calculate your electrical expenses by the day, week, month, even an entire year. Also check the quality of your power by monitoring voltage, line frequency, and power factor. Now you will know if it is time for a new refrigerator or if that old air conditioner is still saving you money. Kill A Watt can help you reduce your power bill and will help find power-wasting appliances so you are able to decide whether it is worth keeping them plugged in. For standard 115 VAC appliances only, 15 amps maximum, 125 VAC maximum.

Find Out How Much Electricity You’re Using

Large LCD display counts consumption by the kilowatt-hour

The U.S Department of Energy reports that 20% of our electric bills come from items that are left plugged in when they are not in use, or items that are in standby mode. With the Kill A Watt P4400 we can monitor the energy eaters in our homes and cut down our electric bills at the same time. Plug whatever item you want into the device and it will tell you the efficiency of that item by displaying the kilowatt per hour. This device will help you determine which items are costing you the most to run. The Kill A Watt also calculates voltage, line frequency, current, and power factor. You can calculate your electric bill before you even receive it from the electric company.

Test The Quality of Your Home’s Power

But measuring appliance consumption is just the tip of the iceberg. Because it can monitor voltage (Volt) and line frequency it can also test if an outlet is working, or evaluate the quality of the electrical power provided by your utility company. It can detect voltage drops around the house, help to predict brownout conditions or to make sure a new home’s outlets are in working condition before escrow closes.

The LCD shows all meter readings: volts, current, watts, frequency, power factor, and VA

About P3 International

Founded in 1987, P3 International is a privately owned manufacturer of solution oriented consumer products. For the last twenty years they have strived to develop products that are easy to use and ahead of their time. Thanks to their customer-centric attitude and support from their clients, they have experienced steady growth over the past decade.

They are committed to manufacturing high quality products that appeal to a variety of different people, from the environmentally conscious to the more technologically-minded consumer. With this philosophy driving them they are always looking for innovative new products which they can offer their customers.

Their unique products have garnered much attention, in particular the Kill A Watt. Reviews of P3 products have been featured in newspapers such as The New York Times and The Wall Street Journal.

Technical Specifications

Do It All, and Then Some

The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection. It’s tough rubber sleeve protects it from the drops and falls associated with the toughest jobs.

Built for Everyday Use

A Data Hold function keeps the measurements displayed on the MSR-R500 while you record them and a larger display makes the MSR-R500 multimeter even easier to read. Add in the LCD backlight and protective rubber bumper and this is the meter for every job.

Specifications

Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation

Max.display: 1999, 3 1/2 digits

Range selection: Manual ranging

Overload display: Display OL

Sampling Speed: 2 times per second

Power: 1 x 9V 6F22 Battery Included (Low Battery Indication)

Diode Test: Yes

Continuity Test: Yes

Square Wave Output: Yes

Dimensions: 5.1″ x 2.9″ x 1.4″

DC Voltage: 200mV/2000mV/20V/200V ± (0.5%+2), 500V (0.8%+2) 

AC Voltage: 200V/500V ± (2%+10)

DC Current: 2000μA/20mA ± (1%+2), 200mA ± (1.2%+2), 10A ± (2%+5)

Resistance: 200Ω ± (0.8%+5), 2000Ω/20KΩ/200KΩ ± (0.8%+2), 20MΩ ± (1%+5), 200MΩ ± [5%(reading-10)+10] 

Package Includes

1 x Etekcity MSR-R500 Digital Multimeter

2 x Test Leads (pair) 

1 x GP Supercell 6F22 9V Battery

1 x User’s Manual