
Nowadays, there are so many products of 5′ gas appliance connector in the market and you are wondering to choose a best one.You have searched for 5′ gas appliance connector in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 5′ gas appliance connector which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
801 reviews analysed
1. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
2. Dormont 0240892 Gas ApplianceConnectorKit 48 In. Long 5/8 In. Outlet Diameter Yellow Coated
Feature
- COMPLETE GAS RANGE INSTALL KIT: “Safety Shield” coated gas range or furnace installation kit
- LEAK TESTED GAS KIT: 5/8-Inch OD x 48-Inch length coated stainless steel gas connector
- GAS INSTALLATION KIT INCLUDES: two 1/2-Inch MIP (tapped 3/8-Inch FIP) brass adapters and one 3/4-Inch MIP (tapped 1/2-Inch FIP) adapter
- BEST GAS DRYER CONNECTOR KIT: Made in the USA. Everything you need to hook up your gas dryer
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
Description
Product Description
Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals
3. Easyflex Yellow Coated Stainless Steel 1/2" MIP x 1/2" FIP x 18" (1/2" OD) Gas Flex Connector (18" x 1/2")
Feature
- Yellow coated polymer exterior & double corrugated for extra protection and flexibility
- Comes with MIP and FIP flare fittings.
- Compatible with Brasscraft CSSB21 for high rating BTU
- CSA certified and ideal for indoor and outdoor use
- Application includes residential/commercial tank and tankless water heaters, boilers, fryers, stoves
Description
Easyflex gas connectors are CSA certified to ANSI Z21.24 CSA/CGA 6.10 Standard connectors for gas appliance and ANSI Z21.75 CSA/CGA 6.27 Standard Connectors for outdoor gas appliance and manufactured homes. The corrosion resistant yellow coating protects the product from exposure from harsh weather and certain chemicals. See BTU chart for rating.
4. PROCURU 72" x 1/2" OD Gas Flex Line Connector Kit with 1/2" Straight Valve for Dryer, Water Heater, Grill- Weatherproof Flexible Stainless Steel Pipe with Yellow SafeGuard Coating
Feature
- 1/2″ Outer Diameter x 72″ Length (6 ft.) Stainless steel gas connector with SafeGuard Coating for anti-corrosion and air-tight protection
- (3) Brass fittings included: 1/2″ MIP (tapped 3/8″ FIP) (2 pcs), and 3/4″ MIP (tapped 1/2″ FIP) (1 pc)
- 1/2″ FIP Straight gas valve, 4-Mil High-density gas PTFE sealant tape 1/2″ x 520″, installation instructions
- Designed for gas dryer, water heater, grills, and other natural and propane gas appliances
- 100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, LP, and LP-gas air mixtures
Description
PROCURU Gas Connector is tested and certified by CSA for indoor and outdoor use. Approved for LP or Propane including Natural Gas used in common appliances. 100% leak tested for safe and reliable performance. SafeGuard Coating adds patented layer of protection on Corrugated Stainless Steel Tubing against corrosion and common household cleaning agents.
5. BrassCraft CSSL45R-72 P Safety PLUS Gas Appliance Connector with 3/8" OD EFV and 1/2" MIP x 1/2" FIP x 72"
Feature
- 1/4 In. ID (3/8 In. OD) x 72 In. corrugated stainless steel connector with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
6. BrassCraft CSSC54-72 P 1/2-Inch FIP x 1/2-Inch MIP x 72-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 86,000 BTU
Feature
- 5/8 In. OD with 15/16-16 Thread x 72 In. stainless steel connector w/corrosion resistant coating
- 1/2 In. FIP and 1/2 In. MIP steel gas fittings
- 86,000 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Product Description
Brass Craft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
7. BrassCraft CSSL45R-60 P Safety PLUS Gas Appliance Connector with 3/8" OD EFV and 1/2" MIP x 1/2" FIP x 60"
Feature
- 1/4 In. ID (3/8 In. OD) x 60 In. corrugated stainless steel connector with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 1/2 In. MIP (3/8 In. FIP) EFV x 1/2 In. FIP x 60 In. Safety+PLUS Gas Appliance Connector is 3/8 In. OD (1/4 In. ID) with a maximum operating capacity of 24,900 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
8. LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings
Description
Product Description
LASCO 10-1215 LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings. For indoor or outdoor use. Yellow safty coating – corrugated stainless steel. For use with natural gas or propane. Connect to gas dryers! Larsen Supply a third generation family owned and operated company with over 80 years of experience has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk SKU’s. We pride ourselves on service, selection and support! All Lasco merchandise if warranted to be free of manufacturing defects. Please revert to retail place of purchase for resolution of any possible plumbing questions, warranty or defective part replacement.
From the Manufacturer
LASCO 10-1215 Flexible Gas Dryer Connector Line, 3/8-Inch Diameter with 1/2-Inch Fittings, 72-Inch Long. 3/8-Inch X 72-Inch Gas Appliance Connector, Flexible Stainless Steel, Safety Coating, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Dryers.
9. Flextron FTGC-YC34-36P 36" Flexible Yellow Epoxy Coated Gas Line Connector with 1" Outer Diameter and 3/4" FIP x 3/4" MIP Fittings, Stainless Steel
Feature
- High BTU Gas Connector with 1″ Outer Diameter
- Yellow/Stainless Steel
- 36″ Long with 3/4″ FIP x 3/4″ MIP Fittings
- Gas Connector is 100% Leak Tested
- Designed and Engineered for Safe, Optimal Flow Rate
- Up to 290K BTU Flow Capacity
- FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304
- For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters
Description
This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.
10. BrassCraft CSSC22-24 P 3/4-Inch FIP x 3/4-Inch FIP x 24-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 150,000 BTU
Feature
- Manufactured in China
- Easy to use
- Highly durable
- 5/8 In. OD with 15/16-16 Thread x 24 In. stainless steel connector w/corrosion resistant coating
- (2) 3/4 In. FIP steel gas fittings
- 150,000 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Product Description
SC Series, 1/2″ I.D. x 5/8″ O.D. Tube, 3/4″ Female Pipe Thread x 3/4″ Female Pipe Thread, 24″ Pro-Coat Epoxy Coated, Stainless Steel Gas Appliance Connector, Product Comes in Re-Sealable Zip lock Bags, AGA Approved & IAS Design Certified For Indoor/Outdoor Use, Recommended For Gas Ranges.
From the Manufacturer
BrassCraft’s 3/4 In. FIP x 3/4 In. FIP x 24 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 150,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
Conclusion
By our suggestions above, we hope that you can found 5′ Gas Appliance Connector for you.Please don’t forget to share your experience by comment in this post. Thank you!